News Center

Company News

Industry News

Picture Name

What are molecular sieves? What are the types of molecular sieves?

We often use desiccant in life, commonly used desiccant activated carbon, activated alumina, molecular sieve, silica gel. Different occasions need to use the desiccant is not the same, molecular sieve is mainly used for the depth of the gas drying, drying effect is good, can be recycled, different types of gases can be used in different types of molecular sieve adsorption removal. Today we come to understand the molecular sieve. Molecular sieve is a kind of aluminosilicate, which is mainly composed of silicon aluminum through oxygen bridge to form an open framework structure. In this structure, there are many well-aligned pores of uniform pore size, which have a large internal surface area. In addition, it also contains metal ions with low electricity price and large ionic radius and bound water. Due to the continuous loss of water molecules after heating, but the crystal skeleton structure remains unchanged, forming many cavities of the same size. The cavities are connected by multiple micropores of the same diameter, and the molecules of the material have the same diameter. A pore having a smaller diameter than the pore is adsorbed in the cavity. Molecules larger than the pores are repelled, so molecules of different sizes are separated until the action of the screening molecule is called a molecular sieve. It is mainly used for the deep drying of various gases and liquids, the separation and purification of gases, liquids, catalyst carriers, etc., so it is widely used in oil refining, petrochemical, chemical, metallurgy, electronics, national defense and other industries, and more and more widely used in medical treatment, Optics, agriculture, environmental protection and many other aspects.

06

2023

/

04

Picture Name

Working principle of molecular sieve

In the low-temperature rectification air separation device, the water, carbon dioxide, acetylene, hydrocarbons and other substances in the raw material air must be removed before the air enters the rectification tower. Otherwise, the water and carbon dioxide will freeze and adhere to the heat exchanger and rectification tower in the low-temperature environment, thus reducing the working efficiency and increasing the resistance of the equipment. Methane in liquid oxygen has high solubility and is not easy to precipitate, while other components will precipitate and aggregate in liquid oxygen in the rectification tower, compromise the operation of the device. In order to avoid blockage and explosion of low-temperature equipment, ensure the long-term safe and reliable operation of the device. Therefore, the molecular sieve is the key device in which the air is purified before the air enters the low temperature cold box.

06

2023

/

04

Picture Name

Regeneration of Molecular Sieve in PSA Air-separation Plant

For PSA pressure swing adsorption molecular sieve air separation equipment, molecular sieve is the core component of the system; only clean compressed air through the molecular sieve continuous adsorption and regeneration, in order to continue the production of nitrogen or oxygen we need.

06

2023

/

04

Picture Name

[China Science News] New research uses three-dimensional electron diffraction technology to analyze the structure of molecular sieves

Recently, the team of researcher Guo Peng and academician Liu Zhongmin of Dalian Institute of Chemical Physics of the Chinese Academy of Sciences cooperated with the team of Associate Professor Wang Lei of Nanjing University of Technology to make new progress in the study of molecular sieve structure analysis. The team used advanced three-dimensional electron diffraction technology (cRED) to directly resolve the structure of pure silicon molecular sieves containing ordered silicon hydroxyl groups. The results were published in the Journal of the American Chemical Society.

06

2023

/

04

Picture Name

Luoyang Xinling Micro-nano New Materials Co., Ltd. 5000 Tons/Year Nano Adsorbent Project to be Approved and Publicized

According to the relevant provisions of the examination and approval procedures for the environmental impact assessment of construction projects, after deliberation, our bureau intends to make examination and approval opinions on the environmental impact assessment documents of one construction project. In order to ensure the seriousness and impartiality of the approval opinions, the basic information of the environmental impact assessment document of the construction project is now publicized. If you have any objection, please feedback to the administrative examination and approval service department of our bureau during the publicity period. The publicity period is from October 21, 2022 to October 27, 2022.

21

2022

/

10

Picture Name

Luoyang Xinling Micro-Nano New Materials Co., Ltd. 5000 Tons Annual Nano Adsorbent Project

The 5000-ton/year nano-adsorbent project proposed by Luoyang Xinling Micro-Nano New Materials Co., Ltd. is located on the north side of Weiyi Road, Geely Industrial Park, Mengjin District, Luoyang City. According to the survey entrustment letter provided by the design unit, the bottom size and load of each building and other architectural features are shown in the following table:

06

2023

/

04

< 12 >
Luoyang Xinling Micro-nano New Materials Co., Ltd.
Search

Key words:3A molecular sieve, 4A molecular sieve, 13X molecular sieve, PSA molecular sieve for hydrogen production, PSA molecular sieve for oxygen production, VPSA molecular sieve for oxygen production

Message consultation

Solutions for your industry to choose from

Submission
Quote Now